Konica Minolta PageScope Enterprise Suite - Manual (Page 13)

Upper Limit Settings 4
Account Manager 4-5
<Auto Reset Settings>
Operation when upper limit setting is enabled
If "Upper Limit Settings" is set to "Enable", the upper limit counters are
collected and an operation is performed, for example, printing is prohibited
or a warning is sent by e-mail when the upper limit specified in the Setting by
User page is nearly reached.
Operation when upper limit setting is disabled
If "Upper Limit Settings" is set to "Disable", printing is allowed after the upper
limit counter is collected.
When changed from "Disable" to "Enable"
When "Upper Limit Settings" is changed from "Disable" to "Enable" and the
[Apply] button is clicked, the message shown below appears.
To clear all the current values in "Setting by User", click the [OK] button.
To change the setting to "Enable" without clearing all the current values in
"Setting by User", click the [Cancel] button.
2
Reminder
It may take some time to clear all values.
When "Prohibit Printing" is specified for "Operation when value of Upper
Limit was reached", printing prohibition is not released immediately even
if the current value is cleared.
Function Details
Auto Reset Settings Select the measurement units for the cut-off day and the
time period. If a cut-off day is specified, all of the values
currently displayed in the Setting by User page are reset to
0 at 0:00 on the cut-off day.