Konica Minolta Magicolor 2490MF - Manual (Page 114)

Basic Scan to Email Operation 102
"
By specifying one TO address and 124 CC addresses, a total of 125
recipients can be specified.
"
Email addresses specified after the Scan key is pressed are set as
scan to email recipients.
7
Enter a title (subject), and then press the Menu Select key.
8
Enter the email address for any additional recipient as a CC address, and
then press the Menu Select key.
"
To specify more then one CC address, press the Menu Select key to
enter the additional addresses. Repeat step 8 until all of the recipients
have been specified.
9
After you have finished specifying the addresses for additional recipients,
press the Menu Select key.
10
Using the * and ) keys, select the color mode (“COLOR”, “GRAY”, or
“B/W”), and then press the Menu Select key.
11
Using the * and ) keys, select the resolution (150 × 150 dpi, 300 × 300
dpi or 600 × 600 dpi), and then press the Menu Select key.
"
The 600 × 600 dpi resolution cannot be selected if “COLOR” or
“GRAY” was selected as the scan mode in step 10.
"
To specify detailed settings for the scan mode, such as the data format
and compression encoding method, press the
, key.
For information on specifying detailed settings, refer to “Changing the
Scan Mode Settings” on page 107.
12
Press the Menu Select key.
Scanning starts.
"
To change the size of the scanned image, press the , key before
pressing Start key.
For information on changing the size, refer to “Changing the Scanned
Image Size” on page 108.
13
When scanning a document containing several pages, place the next
page on the original glass when the message “NEXT PAGE?” appears,
and then press the Menu Select key.
– Repeat step 14 until all of the pages in the document have been
scanned.