Konica Minolta Magicolor 2490MF - Manual (Page 46)

Configuration Menu Overview 34
E-MAIL SETTING Menu
"
Manufacturer’s default settings appear in bold.
"
To edit or erase entered characters, press the Cancel/C key. To can-
cel a setting, hold down the Cancel/C key until, erase all characters,
and then press the Cancel/C key again.
1 SENDER NAME Enter your name as the sender’s name. A maximum of
20 characters can be entered. The default sender
name is “magicolor 2490MF”.
2 E-MAIL
ADDRESS Type in the email address of the email sender when
using network scanning. A maximum of 64 characters
can be entered.
3 SMTP SERVER Type in the IP address or host name for the SMTP
server. A maximum of 64 characters can be entered.
4 SMTP PORT
NO. Settings 1-65535 (Default : 25)
Specify the number of the port communicating with the
SMTP server.
5 SMTP TIME-
OUT Settings 30-300 (Default : 60)
Enter the amount of time (in seconds) until the connec-
tion with the SMTP server times out.
6 TEXT INSERT Settings ON / OFF
Select whether or not the previously specified text is
inserted into the body of the email message when
using network scanning.
„ ON: The following text is inserted as the body of
the email message.
Image data(TIFF format) has been attached to
the email.
„ OFF: Only the scanned image is attached, and no
text is inserted into the email message.
7 DEFAULT
SUBJECT Specify the subject of the email message when using
network scanning. A maximum of 20 characters can be
entered. The default subject is “From mc2490MF".