Konica Minolta magicolor 4690MF - Manual (Page 37)

Specifying Settings in Utility Menu 31
Specifying Settings in Utility Menu
General Procedure for Specifying Settings in Utility
Menu
1
Press the + or , key to select UTILITY, and then press the Select key.
2
Press the + or , key to select the desired menu, and then press the
Select key to display the selected menu.
"
Refer to the menu configuration on page 11 to display the desired
menu.
3
To select a setting, press the + or , key.
To enter a setting, use the keypad to type in the number.
4
Press the Select key.
The setting is applied.
"
To cancel the settings, press the Back key.
Memory Reception
Received faxes can be stored in the memory and printed at a specified time.
This is convenient, for example, when confidential documents are received.
Memory reception can be used with the following settings.
„ Start/end time settings: Not set
MEMORY RX MODE function is normally set to
ON . To print a fax saved
in memory, set MEMORY RX MODE function to OFF .
„ Start/end time settings: Set
Memory reception mode begins and ends at the specified time.
Example 1: When ON TIME setting is set to 18:00 and OFF TIME setting
is set to 8:00
The machine is in memory reception mode from 18:00 to 8:00 and in
normal reception mode, where faxes are printed after being received,
from 8:00 to 18:00.
Example 2: When ON TIME setting is set to 12:00 and OFF TIME setting
is set to 12:00 (the start time and end time are the same)
MEMORY RX MODE function is normally set to ON ; however, faxes
saved in memory are printed at 12:00.