Konica Minolta bizhub C650 - Manual (Page 141)

C650 3-67
Administrator mode 3
2
Note
If "Enhanced Security Mode" is set to enable, "OFF" is selected.
SNMP Setting
Specify the SNMP settings.
Item Description
SNMP Select whether or not SNMP is used. If yes, specify whether to use SNMP v1/v2 (IP),
SNMP v3, and SNMP v1 (IPX).
SNMP v1 (IPX) can be specified only when IPX is enabled.
UDP Port Setting Default setting: 161
Specify the UDP port number.
SNMP v1/v2c Setting Specify settings for using SNMP v1/v2c.
Read Community Name Specify the community name to be used for scanning (up to 15 characters).
Write Community Name Specify the community name to be used for reading and writing (up to 15 charac-
ters).
SNMP v3 Setting Specify settings for SNMP v3.
Context Name Specify the context name (up to 63 characters).
Discovery User Name Specify the user name for detection (up to 32 characters).
Read User Name Specify the name of read only user (up to 32 characters).
Security Level Specify the security level for read only user.
auth-password Specify the read only user authentication password to be used for authentication
(up to 32 characters).
priv-password Specify the read only user privacy password to be used for privacy (encryption) (up
to 32 characters).
Write User Name Specify the reading/writing user name (up to 32 characters).
Security Level Specify the security level for reading/writing user.