Konica Minolta bizhub C650 - Manual (Page 49)

C650 2-25
User mode 2
2
Reminder
If the E-mail address to be registered does not match the E-mail address of the certificate, the
certificate cannot be registered. Confirm whether both E-mail addresses match, and then register the
certificate.
If "FTP" was selected
If "SMB" was selected
Registration of Certification In-
formation Select this check box to register certificate information.
Select "Registration of Certification Information". Click the [Browse] button, and
then specify the certificate information. Only files in the DER (Distinguished Encod-
ing Rules) format are supported for certificate information.
To delete the certificate information, select "Deletion of Certification Information".
Limiting Access to Destinations To specify the access level of the destination, click the [Display] button. If an access
permission group is specified for the user who is logged on, the settings for "Search
from Reference Allowed Group" appear.
If "Search from Reference Allowed Group" is selected, click the [Search from List]
button, and then select an access permission group from the list. If "Set direct Ref-
erence Allowed Level" is selected, select a level.
Item Description
Item Description
No. Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input" is selected, type in
the number. If "0" is specified, the user box is automatically registered with the next
available number.
Name Type in the name of the destination (up to 24 characters).
Index Select the index characters for the destination. To normally display the destination
in the touch panel, check the "Main" check box.
Host Address Type in the IP address or host name for the FTP server to be used for transmitting
(up to 63 characters). To type in the host name, check the "Please check to enter
host name." check box. If the machine is set to use IPv6, an IPv6 address can also
be specified.
File Path Type in the destination file path (up to 96 characters).
User ID Type in the user ID (up to 47 characters).
Password Type in the password (up to 31 characters).
anonymous Select either "ON" or "OFF".
PASV Mode Select either "ON" or "OFF".
Proxy Select either "ON" or "OFF".
Port No. Type in the port number. (Range: 1 to 65535; Default: 21)
Limiting Access to Destinations To specify the access level of the destination, click the [Display] button. If an access
permission group is specified for the user who is logged on, the settings for "Search
from Reference Allowed Group" appear.
If "Search from Reference Allowed Group" is selected, click the [Search from List]
button, and then select an access permission group from the list. If "Set direct Ref-
erence Allowed Level" is selected, select a level.
Item Description
No. Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input" is selected, type in
the number. If "0" is specified, the user box is automatically registered with the next
available number.
Name Type in the name of the destination (up to 24 characters).
Index Select the index characters for the destination. To normally display the destination
in the touch panel, check the "Main" check box.
Host Address Type in the IP address or host name for the destination computer (up to 255 char-
acters; host name in uppercase letters). To type in the host name, check the "Please
check to enter host name." check box. If the machine is set to use IPv6, an IPv6
address can also be specified.
File Path Type in the destination file path (up to 255 characters, uppercase letters).