Konica Minolta bizhub C650 - Manual (Page 51)

C650 2-27
User mode 2
If "Fax" was selected
2
Note
"Fax" appears if the optional fax kit has been installed.
If "IP Address Fax" was selected
2
Note
"IP Address Fax" appears if the IP address fax operation is available.
Item Description
No. Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input" is selected, type in
the number. If "0" is specified, the user box is automatically registered with the next
available number.
Name Type in the name of the destination (up to 24 characters).
Index Select the index characters for the destination. To normally display the destination
in the touch panel, check the "Main" check box.
Destination Type in the fax number for the destination (up to 38 characters, including only nu-
merals, #, *, -, T, P and E).
Confirm Fax Number Enter the fax number again in order to prevent misentering of the fax number.
This menu item appears when "Confirm Address (Register)" is set to [ON] from the
control panel.
Line Setting Select the line to be used ("No Selection", "Line 1" or "Line 2"). A setting can be
selected if the optional fax multi line is installed.
Communication Setting Click the [Display] button, and then select the check box for a displayed setting
("V34 Off", "ECM Off", "International Communication" or "Check Destination").
Limiting Access to Destinations To specify the access level of the destination, click the [Display] button. If an access
permission group is specified for the user who is logged on, the settings for "Search
from Reference Allowed Group" appear.
If "Search from Reference Allowed Group" is selected, click the [Search from List]
button, and then select an access permission group from the list. If "Set direct Ref-
erence Allowed Level" is selected, select a level.
Item Description
No. Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input" is selected, type in
the number. If "0" is specified, the user box is automatically registered with the next
available number.
Name Type in the name of the destination (up to 24 characters).
Index Select the index characters for the destination. To normally display the destination
in the touch panel, check the "Main" check box.
Host Address Type in the IP address or host name for the destination fax (up to 63 characters). To
type in the host name, check the "Please check to enter host name." check box. If
the machine is set to use IPv6, an IPv6 address can also be specified.
Port No. Type in the port number. (Range: 1 to 65535; Default: 25)
Destination Machine Type Select whether the destination is a color or monochrome machine.
Limiting Access to Destinations To specify the access level of the destination, click the [Display] button. If an access
permission group is specified for the user who is logged on, the settings for "Search
from Reference Allowed Group" appear.
If "Search from Reference Allowed Group" is selected, click the [Search from List]
button, and then select an access permission group from the list. If "Set direct Ref-
erence Allowed Level" is selected, select a level.