Konica Minolta bizhub C650 - Manual (Page 153)

C650 3-79
Administrator mode 3
2
Note
If "Enhanced Security Mode" is set to enable, the "Use SSL/TLS" check box is selected.
If authentication is perfomed with PageScope Authentication Manager, specify the SSL/TLS settings,
and then enable the SSL/TLS settings of the OpenAPI settings.
If authentication is perfomed with PageScope Authentication Manager from the printer driver, set
"Authentication" for OpenAPI Settings to "OFF" from the control panel.
TCP Socket Setting
Specify the TCP socket settings. TCP socket is used during data transmissions between the computer
application and the machine.
2
Reminder
If the TCP socket setting is changed, be sure to turn the machine off, then on again.
When the machine is turned off, then on again, turn the machine off with the [Power] (auxiliary power)
key before turning off the main power switch. In addition, wait at least 10 seconds to turn the machine
on after turning it off; otherwise, the machine may not operate correctly.
If "Enhanced Security Mode" is set to enable, the "Use SSL/TLS" check box is selected.
2
Note
If a certificate is set to enable from the machine, a page appears so that settings can be specified for
"Use SSL/TLS" and "Port No. (SSL)". Specify the appropriate settings for SSL communication.
If "TCP Socket" is set to "OFF", it may no longer be possible to use some applications on the computer.
If authentication is perfomed with PageScope Authentication Manager, specify the SSL/TLS settings,
and then enable the SSL/TLS settings of the TCP Socket settings.
Item Description
TCP Socket/Port Number Select whether or not TCP socket is used. Type in the port number. (Range: 1 to
65535)
Use SSL/TLS/Port No. (SSL) Select whether or not SSL/TLS is used. To use SSL/TLS, select the check box, and
then type in the port number. (Range: 1 to 65535)
TCP Socket (ASCII Mode)/Port
No. (ASCII Mode) To use in the Flash format, select the "TCP Socket (ASCII Mode)" check box. Type
in the port number. (Range: 1 to 65535)