Konica Minolta Digital StoreFront - Manual (Page 111)

Platform Settings
111
How to add a digital signature to the PrintMessenger Installer
Follow the steps below to add a digital signature (PKI, Public Key Infrastructure, or certificate authority)
to the PrintMessenger driver installer (MSI). This will prevent problems with installation on Windows 7
arising from the driver installer’s not being signed.
1. Go to Administration > Site Settings and open the About tab.
2. In the Version Information section, copy the site GUID (which follows GUID = ).
3. Locate the following files issued by the certification authority that is providing you with the digital
certificate.
• credentials.spc
•
password.pwd
• privatekey.pvk
4. Copy the files into the folder C:\Inetpub\wwwroot\DSF\dsffiles\upload\[SITEGUID you copied from
the About tab in step 2 above]\DriverSigning on your Digital StoreFront server.
5. Go to Administration > Installers and rebuild the Windows and Mac PrintMessenger print drivers
by clicking Execute in the BuildInstaller column.
See Also
● Windows PrintMessenger
● Mac PrintMessenger
● Windows eProve (MicroPress v. 8.0.4.0 and older)
● MicroPress (v. 8.0.5.0 and newer)
● RPC (Remote Print Center)