Konica Minolta Digital StoreFront - Manual (Page 272)

Digital StoreFront 5.2 Administration Reference
272
N-Up should only be used for products that are very well-defined, i.e., those that have
only one choice of media size and a known finished size.
i. Enabled: Check the box to activate N-up printing for the product (catalog item). Enabling N-
up pricing enables the two fields below:
ii. N-Up Number of Pages (required): Type a number between 2 and 9999 to specify how
many buyer pages will fit onto the physical sheet.
This value provides MIS & ESC systems with information to use for more accurate
job planning, costing, and scheduling calculations. The default value is 1.
iii. N-Up Preview Size: Select a preview size from the pull-down list; can be set to None or to
any of the standard final sizes as defined on the Administration | Media |Standard Final
Width and Height page.
For more information on defining standard final width and height dimensions for a
product, see Setting a Final Width and Height for Printed Products and Dimensions below.
i. Pre-Selected Services: Show/Hide—Pre-selected services are those that have been set as non-
configurable options for the product (e.g., on the ticket template associated with the product).
Selecting to show pre-selected services will let buyers see all options (e.g., for features
and services), including those that they cannot change.
j. Manage Inventory
Digital StoreFront provides a simple product quantity / reorder point to manage
inventory of non-print-related (e.g., Non Printed, Static).
● Enabled: Enabling inventory management lets you manage non-printed and static product
inventory (e.g., finished goods).
● Inventory: Set the initial inventory of the product.
● Allow Back Order: Check this box to enable processing of products that are on back order.
If you select this option, buyers will not be notified during order placement that the
whole or a partial quantity of the order is back-ordered.
● Threshold: Sets the reorder point (i.e., when inventory level reaches 10, send email
notification to recipient specified below). This number must be smaller than the Inventory
value you entered above.
● Notification Email ID: Specifies recipients to be notified by email when the inventory
threshold is reached. You can enter multiple recipient email addresses separated by a semi-
colon ( ; ).