Z fold half sheet position adjustment, Z fold half sheet position adjustment -6 – Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 User Manual
Page 90
Z Fold Half Sheet Position Adjustment
Adjust the A fold position.
1.
Select Z Fold Half Sheet- A3, Z Fold Half Sheet- B4, Z Fold Half Sheet-11x17”, or
Z Fold Half Sheet - 8K, and press Change Settings.
2.
Press Sample Printout.
3.
Select the tray and press the Start button.
4.
Press Save.
5.
Check the output sample, and measure the A and B fold position movement amounts.
6.
Enter the measurement value you obtained in the previous step in Values A.
Note
Set value B so that an edge of the paper does not extend past a fold position of the
paper. An edge of paper extending past a fold position of the paper may cause a
paper jam.
7.
Press Sample Printout again to print an output sample, and check the adjustment
results.
8.
Make adjustments again if necessary (Step 6).
9.
Press Save.
Xerox
®
Color 550/560/570 Printer
8-6
System Administrator Guide
Image Registration Setups