Xerox WorkCentre M35-4011 - Manual (Page 47)

Bi-Directional Printer Drivers 1-31
Status Dialog
The Bi-Directional printer drivers have incorporated some of the reporting functions
of the CentreWare Conductor. These functions are reported on the Status dialog
available to you through the Status button on the Paper/Output tab.
The Status dialog shows the status of your Xerox system as well as specific
information about your print jobs. You can check the status of up to 25 jobs currently
in the print queue or you can verify the status of completed jobs. You can use this
dialog to check the properties of the paper loaded in different paper trays on your
printer and also the current paper levels in those trays. You can also use this dialog to
verify that your printer is functioning properly.
The Status dialog is divided into two sections. The upper portion reports the general
status of your Xerox system. The lower portion has three tabs and reports specific
information about Active Jobs, Completed Jobs, and the Paper Status in your Xerox
system.
Figure 1-14: Status Dialog, Paper Status Tab