Xerox WorkCentre M35-4011 - Manual (Page 54)

2-4 Getting the Most From Your Printer Driver
Default Tabs
These driver tabs are accessed through the Printers folder and may be available only
with administrative rights. From the desktop select Start > Settings > Printers.
Right-click on your printer icon and select Properties (9x), Document Defaults
(NT 4.0), or Printing Preferences (2000/XP) from the menu. The printer driver
dialog appears. Driver settings from this dialog become the default settings. All the
General Tabs available through your application’s print dialog are available, as well
as some other tabs such as the Configuration tab and the Device Settings tab.
The Configuration tab contains three buttons: Bi-Directional Setup, Installable
Options, and Accounting. Each button opens a dialog to configure your driver.
„ Through Bi-Directional Setup you can enable Bi-Directional Communication.
You will then receive information through your driver about your print job,
Xerox system, and paper status. See Bi-Directional Printer Drivers on page 1-30.
„ Through Installable Options you can manually configure your driver with the
number of paper trays and installable options on your Xerox system.
„ Through Accounting you can set up the accounting features available to you. See
the Accounting topic in the Help System of your driver for more information.
The Device Settings tab contains features that relate to font settings and PostScript
settings.