Xerox WorkCentre 7970-3795 - Manual (Page 13)

Safety
Notices and Safety
Carefully read the following instructions before operating your printer. Refer to these instructions to
ensure the continued safe operation of your printer.
Your Xerox ® printer and supplies are designed and tested to meet strict safety requirements. Safety
requirements include safety agency evaluation and certification, and compliance with electromagnetic
regulations and established environmental standards.
The safety and environment testing and performance of this product have been verified using Xerox ®
materials only.
WARNING: Unauthorized alterations, which can include the addition of new functions or connection
of external devices, can affect the product certification. For details, contact your Xerox representative.
Emergency Turn Off
If any of the following conditions occur, turn off the printer immediately and disconnect the power cord
from the electrical outlet. Contact an authorized Xerox service representative to correct the problem if:
• The equipment emits unusual odors or makes unusual noises.
• The power cable is damaged or frayed.
• A wall panel circuit breaker, fuse, or other safety device has been tripped.
• Liquid is spilled into the printer.
• The printer is exposed to water.
• Any part of the printer is damaged.
General Guidelines
WARNINGS:
• Do not push objects into slots or openings on the printer. Touching a voltage point or shorting out
a part could result in fire or electric shock.
• Do not remove the covers or guards that are fastened with screws unless you are installing
optional equipment and are instructed to do so. Turn off the printer when performing these
installations. Disconnect the power cord when removing covers and guards for installing optional
equipment. Except for user-installable options, there are no parts that you can maintain or service
behind these covers.
Xerox ® WorkCentre ® 7970 Multifunction Printer 13
User Guide