Xerox WorkCentre 7970-3795 - Manual (Page 297)

Regulatory Information
Power Consumption and Energy Saver Activation Time
The amount of electricity a product consumes depends on the way the device is used. This product is
designed and configured to enable you to reduce your electricity costs.
After the last print, the device switches to Ready mode. In this mode, the device can print again
immediately. If the device is not used for an interval of time, the device switches to Energy Saver mode.
In Energy Saver mode, only essential functions remain active, which permits reduced product power
consumption.
The product takes slightly longer to produce the first print after it exits Energy Saver mode than it takes in
Ready mode. This delay is the result of the system waking up from Energy Saver mode and is typical of
most imaging products on the market.
Before you turn off Energy Saver mode or set a long activation time, consider the increase in product
power consumption.
To learn more about Xerox participation in sustainability initiatives, go to:
www.xerox.com/about-xerox/environment/enus.html .
Default Energy Saver Settings for Product
The Xerox ® WorkCentre ® 7970 Multifunction Printer is ENERGY STAR ® qualified under the ENERGY STAR
Program Requirements for Imaging Equipment. The transition time from Standby to Energy Saver mode,
which can be up to 30 minutes, is set to a default value of 2 minutes. The transition time from Energy
Saver mode to Sleep, which can be up to 30 minutes, is set to a default value of 0 minutes. The transition
time from Standby to Sleep for this printer can be up to 60 minutes.
To configure Energy Saver settings, see Setting Energy Saver Mode on page 42.
Germany
Germany - Blue Angel
RAL, the German Institute for Quality Assurance and Labeling, has awarded this device
the Blue Angel Environmental Label. This label distinguishes it as a device that satisfies
Blue Angel criteria for environmental acceptability in terms of device design,
manufacture, and operation. For more information, go to: www.blauer-engel.de .
Blendschutz
Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz
vorgesehen. Um störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht
im unmittelbaren Gesichtsfeld platziert werden.
Xerox ® WorkCentre ® 7970 Multifunction Printer 297
User Guide