Installation, 1 unpacking – AEG L76285FL User Manual

Page 26

Advertising
background image

Problem

Possible cause

Possible solution

You did not remove the
stubborn stains before
you wash the laundry.

Use special products to remove
the stubborn stains.

Incorrect temperature
was set.

Make sure that you set the cor-
rect temperature.

Too much laundry load.

Decrease the laundry load.

After the check, activate the appliance.
The programme continues from the
point of interruption.
If the problem occurs again, contact the
service centre.

If the display shows other alarm codes,
contact the service centre.

14. INSTALLATION

14.1 Unpacking

1.

Use the gloves. Remove the external
film. If necessary, use a cutter.

2.

Remove the cardboard top.

3.

Remove the polystyrene packaging
materials.

26 www.aeg.com

Advertising
This manual is related to the following products: