AEG L76285FL - Manual (Page 29)

14.2 Positioning and levelling
x4
• Install the appliance on a flat hard
floor.
• Make sure that carpets do not stop
the air circulation below the appliance.
• Make sure that the appliance does not
touch the wall or other units
• Loosen or tighten the feet to adjust
the level. A correct adjustment of the
appliance level prevents the vibration,
noise and the movement of the appli-
ance when in operation.
• The appliance must be level and sta-
ble.
CAUTION!
Do not put cardboard, wood or
equivalent materials below the
appliance feet to adjust the level.
Make sure that there is sufficient
access after the installation for
possible repairs by a qualified
person.
Installation on suspended
flooring
Suspended wooden floors are particular-
ly susceptible to vibration. To help pre-
vent vibration we recommend you place
a waterproof wood panel, at least 15 mm
thick under the appliance, secured to at
least 2 floor beams with screws, the
wood panel must extend beyond the
front feet.
If possible install the appliance in one of
the corners of the room, where the floor
is more stable
ENGLISH
29