AEG L76285FL - Manual (Page 9)

D • The programme time
When the programme starts, the time decreases with steps of 1 mi-
nute.
• The delay start
When you press the delay start button, the display shows the delay
start time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Re-
fer to 'Troubleshooting' chapter.
• Err
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button 4 flashes.
•
When the programme is completed.
1) Only available for Spin/Drain programme.
2) The symbols appear on the display when the related phase or function is set.
6.4 Start/Pause button 4
Press button 4 to start or interrupt a
programme.
6.5 Delay start button 5
Press button 5 to delay the start of a
programme from 30 minutes to 20 hours.
6.6 Time save button 6
Press the button 6 to decrease the
programme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
6.7 Extra rinse button 7
Press button 7 to add rinsing phases to
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
6.8 Stain button 8
Press button 8 to add the stain phase
to a programme.
Use this function for laundry with hard
stains to remove.
When you set this function, put the stain
remover into compartment
.
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
6.9 Spin button 9
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a pro-
gramme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
ENGLISH
9