AEG DE4003000M - Manual (Page 13)

2. Use again and again until the display shows the necessary clock function and the
related symbol, for example Minute Minder .
3. Use or to set the necessary time.
You can hear an acoustic signal for 2 minutes when the time is completed, “00.00” and
the related function indicator flash. The appliance switches off.
4. Use any button to switch off the acoustic signal.
With Minute Minder the oven must be switched on to set the clock function.
With Duration and End the oven switches off automatically.
With Duration and End you must set the oven function and the temperature first,
then you can set the clock function.
Heat+Hold
To keep the prepared food warm for 30 minutes, after the cooking is completed.
Switching on Heat+Hold
1.
Set clock functions Duration and/or End .
2. Use Selection again and again, until the display shows the symbol Keep warm .
3. Use , the display shows “00:30”
4. When the set oven function is completed, a signal sounds and Heat+Hold starts. The
set oven function operates at 80°C for 30 minutes. The oven then switches off auto-
matically.
The temperature for the set oven function must be above 80°C.
ADDITIONAL FUNCTIONS
Cooling fan
When the appliance operates, the cooling fan switches on automatically. If you switch off
the appliance, the cooling fan continues to operate until the appliance cools down.
Switch-on lock
WARNING!
When the switch-on lock is set, you can not operate the oven.
Switching on the switch-on lock
1.
Switch on the appliance. No oven function must be set.
2. Use Selection and at the same time, until the display shows “SAFE”. The switch-
on lock is switched on.
Switching off the switch-on lock
1.
If necessary, switch on the appliance.
2. Use Selection and at the same time, until the display stops to show "SAFE". The
switch-on lock switches off.
Additional functions 13