AEG DE4003000M - Manual (Page 32)

2x 3,5x25
Electrical installation
WARNING!
Only a qualified and competent person must do the electrical installation.
The manufacturer is not responsible if you do not follow safety precautions from chapter
"Safety".
This appliance is supplied without a main plug and a main cable.
Applicable cable types : H07 RN-F, H05 RN-F, H05 RRF, H05 VV-F, H05 V2V2-F (T90), H05
BB-F
Electrical Installation
• Enquiries regarding the installation of the cooker point, if required, should be made to
your Regional Electricity Company to ensure compliance with their regulations.
• The appliance socket switch should be outside the cabinet but within 2m of the appli-
ance to make it accessible to switch off the appliance in case of an emergency.
• To protect the hands, wear gloves when lifting the oven into its housing.
HOUSE CIRCUIT
Earth leakage and continuity tests must be carried out before the appliance is connected to
the mains supply and re-checked after fitting.
GETTING THINGS READY CHOICE OF ELECTRICAL CONNECTION
There are three possible ways to connect your appliance. In each case the appliance should
be operated using at least 6mm² twin core and earth PVC insulated multicore cable. Please
choose from the most appropriate after reading the different methods :
a) By connecting to a cooker point (having a double pole isolating switch with at least
3mm contact separation in all poles and neutral) and protected with a fuse or minia-
ture circuit breaker at your mains fuse box.
b) By connecting the appliance together with a hob directly to a cooker point(s). Having a
double pole isolating switch with at least 3mm contact separation in all poles and neu-
tral.
32 Installation