AEG MCD3881E-M - Manual (Page 17)

Temperature Switch-off time
120 °C - 195 °C 8.5 h
200 °C - 230 °C 5.5 h
The automatic switch-off works
with all functions except Light ,
Duration and End Time .
10.6 Cooling fan
When the appliance operates, the cool-
ing fan activates automatically to keep
the surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
can continue to operate until the appli-
ance cools down.
11. CARE AND CLEANING
WARNING!
Refer to the Safety chapters.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a
cleaning agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the appliance interior after each
use. Then you can remove dirt more
easily and it does not burn on.
• Clean stubborn dirt with a special
oven cleaner.
• Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause damage to the
nonstick coating.
11.1 Steam Cleaning
1. Remove the worst of the dirt man-
ually.
2. Put 250 ml of water with 3 table-
spoons of vinegar directly into the
steam generator.
3. Activate the Steam Cleaning func-
tion in the main menu. The display
shows the duration of the function.
4. An acoustic signal sounds when the
programme is completed. Touch a
sensor field to deactivate the signal.
5. Wipe out the appliance with a soft
cloth. Remove the remaining water
from the steam generator.
6. Keep the appliance door open for
approximately 1 hour. Wait until the
appliance is dry.
11.2 Shelf support
You can remove the shelf support to
clean the side walls.
ENGLISH
17