AEG MCD3881E-M - Manual (Page 20)

12. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does
not heat up. The appliance is deactiva-
ted. Activate the appliance.
The appliance does
not heat up. The clock is not set. Set the clock.
The appliance does
not heat up. The necessary settings are
not set. Make sure that the settings
are correct.
The appliance does
not heat up. The Child Lock is activated. Refer to "Deactivating the
Child Lock".
The appliance does
not heat up. The fuse is released. Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact an
authorized electrician.
The lamp does not
operate. The lamp is defective. Refer to "Lamp”.
"Demo" comes on
in the display and
the appliance does
not heat up.
The fan does not
operate. The test mode is activated. 1. Deactivate the appli-
ance.
2. Touch and hold un-
til the appliance acti-
vates and deactivates.
3. Touch and hold and
at the same time
until an acoustic signal
sounds and “Demo”
goes out.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on the front frame of the appliance cavi-
ty.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
13. INSTALLATION
WARNING!
Refer to the Safety chapters.
20 www.aeg.com