AEG MCD3881E-M - Manual (Page 7)

4. BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
4.1 Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and
Cleaning".
4.2 First Connection
When you connect the appliance to the
mains or after the power cut, you have to
set the language, the display contrast,
the display brightness and the time of
the day. Press
or to set the value.
Press OK to confirm.
5. CONTROL PANEL
5.1 Electronic programmer
11 10 9 8 7 6 5 4 3 2 1
Use the sensor fields to operate the appliance
Num-
ber
Sen-
sor
field
Function Comment
1
-
Display It shows the settings of the appliance.
2
On / off To activate and deactivate the appliance.
3
Heating Func-
tions or Assisted
Cooking To set a heating function or an Assisted
Cooking function. To set the necessary
function, touch the sensor field one or two
times after you activate the appliance. To
activate or deactivate the lamp, touch and
hold the sensor field for 3 seconds (you
can also activate the lamp after you deac-
tivate the appliance).
4
Favourite Pro-
gramme To save your favourite programmes to use
for a different time.
ENGLISH
7