AEG BE3003021W - Manual (Page 14)

warm. The display shows the
remaining temperature.
• Cooking with the lamp off - touch
and hold for 3 seconds to
deactivate the lamp during cooking.
• Eco functions - refer to "Heating
Functions".
• When you use the function: Moist
Fan Baking, the lamp deactivates
after 30 seconds. The lamp activates
again when you touch for 3
seconds or when you open the
appliance door.
• When you use the Eco functions, the
lamp deactivates. The lamp activates
again when you touch for 3
seconds or when you open the
appliance door.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function Application
Minute Minder To set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the
appliance is deactivated.
Use
to activate the function. Press or
to set the minutes and to start.
Duration To set the length of an operation (max. 23 h
59 min).
End Time To set the switch-off time for a heating func-
tion (max. 23 h 59 min).
If you set the time for a clock function,
the time starts to count down after 5
seconds.
If you use the clock functions:
Duration, End Time, the
appliance deactivates the
heating elements after 90 % of
the set time. The appliance
uses the residual heat to
continue the cooking process
until the time ends (3 - 20
minutes).
7.2 Setting the clock functions
• Before you use the
functions: Duration, End
Time, you must set a
heating function and
temperature first. The
appliance deactivates
automatically.
• You can use the functions:
Duration and End Time at
the same time if you want
to automatically activate
and deactivate the
appliance on a given time
later.
• The functions: Duration
and End Time do not work
when you use the core
temperature sensor.
1. Set a heating function.
www.aeg.com 14