AEG BE3003021W - Manual (Page 14)

Fast Heat Up Indicator
This function decreases the heat-up
time. To activate the function, hold
for 3 seconds. The heat-up indicator al-
ternates.
Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
6.6 Energy saving
The appliance contains features
which help you save energy
during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than
30 minutes or you must use the
clock functions ( Duration , End
Time ).
– When the appliance is off, you can
use the heat to keep food warm.
The display shows the remaining
temperature.
• Cooking with the lamp off - touch
and hold for 3 seconds to deacti-
vate the lamp during cooking.
• When you use the Moist Fan Baking
function, the lamp deactivates after 30
seconds. The lamp activates again
when you touch
for 3 seconds or
when you open the appliance door.
• Eco functions - refer to section "Heat-
ing Functions" (for selected models
only).
7. CLOCK FUNCTIONS
Symbol Function Description
Minute Minder
To set a countdown (max. 2 h 30 min). This func-
tion has no effect on the operation of the appli-
ance. Use to activate the function. Press
or
to set the minutes and OK to start.
Duration
To set how long the appliance has to be in opera-
tion (max. 23 h 59 min).
End Time
To set the switch-off time for a heating function
(max. 23 h 59 min).
If you set the time for a clock function,
the time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90 % of the set time.
The appliance uses the residual
heat to continue the cooking
process until the time ends (3 -
20 minutes).
Setting the clock functions
1. Set a heating function.
2.
Press again and again until the
display shows the necessary clock
function and the related symbol.
3.
Press or to set the necessary
time. Press OK to confirm. When the
time ends, an acoustic signal
sounds. The appliance deactivates.
The display shows a message.
4. Press a sensor field to stop the sig-
nal.
Useful information:
• With Duration and End Time you must
set the heating function and the tem-
14 www.aeg.com