AEG BE3003021W - Manual (Page 17)

The display shows the core tempera-
ture sensor.
4.
Press or in less than 5 sec-
onds to set the core temperature.
5. Set the oven function and, if neces-
sary, the oven temperature.
The appliance calculates an approxi-
mate end time. The end time is dif-
ferent for the different quantities of
the food, the set oven temperatures
(minimum 120 °C) and the operating
modes. The appliance calculates the
end time in approximately 30 mi-
nutes.
The core temperature sensor
must stay in the meat and in the
socket during the cooking.
6. When the meat is at the set core
temperature, an acoustic signal
sounds. The appliance deactivates
automatically. Touch a sensor field
to stop the signal.
7. Remove the core temperature sen-
sor plug from the socket and remove
the meat from the oven.
To change the core temperature,
press
.
WARNING!
The core temperature sensor is
hot. There is a risk of burns. Be
careful when you remove the tip
and the plug of the core temper-
ature sensor.
9.2 Inserting the accessories
Wire shelf and deep pan together:
The deep pan and the wire shelf have
side edges. These edges and the shape
of the guide-bars are a special device to
prevent the cookware from slipping.
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
ENGLISH
17