AEG DE4003000M - Manual (Page 10)

Oven function Application
Keep Warm To keep food warm.
Fan Controlled De-
frosting
To defrost frozen food.
Base Heat Finish-
ing
To bake cakes with crispy or crusty bases
and to preserve food.
5.4 Selecting an oven
1. Switch on the appliance using the
On/Off
button.
2.
Press the button repeatedly until
the desired oven appears (Top /
Main )
5.5 Setting the oven function
Use to set the oven function.
The display shows the recommended
temperature.
If you do not change this temperature in
less than approximately 5 seconds, the
appliance starts to heat.
When the appliance operates at
the set temperature, an acoustic
signal sounds.
You can change the oven func-
tion while the oven operates.
5.6 Changing the oven
temperature
Press the or button to set the tem-
perature.
Checking the oven
temperature
Press the Temperature check
button to display the current
temperature of the oven.
5.7 Switching off the oven
function
Use again and again, until the display
does not show an oven function.
5.8 Heat- up indicator
If you switch on an oven function, the
bars on the display come on one by one.
The bars show that the oven tempera-
ture increases.
5.9 Residual heat indicator
When you switch off the oven, the bars
on the display show the residual heat.
10 www.aeg.com