Olympus EVOLT E-500 - Manual (Page 125)

125
8
C
u
st
omi
zin
g th
e set
ting
s/fu
nct
ion
s of
you
r c
amera
Compensating all WB
This lets you apply the same compensation value to all the white balance
modes at once.
1
Menu [ ] [ALL >]
2
Use to set.
[ALL SET] The same compensation value
applies to all WB modes.
[ALL RESET] The WB compensation value
settings applied to each WB
mode are all cleared at once.
3
Press the i button.
4
Do the following steps depending on the setting you want.
If you select [ALL SET]
1) Use bd to select the color direction.
R-B Red-Blue
G-M Green-Magenta
2) Use ac to set compensate value.
g "WB Compensation" (P. 91)
• You can check the white balance you have adjusted.
If you select [ALL RESET]
1) Use ac to select [YES].
5
Press the i button.
This allows the built-in flash to output a fixed amount of light. With [MANUAL
FLASH] set to [ON], you can set the amount of light (FULL, 1/4, 1/16, or 1/64)
in the flash mode setting.
1
Menu [ ] [MANUAL FLASH]
2
Use to select [ON] or [OFF].
3
Press the i button.
Manual flash