Olympus EVOLT E-500 - Manual (Page 66)

66
Remote control shooting
4
V
ario
u
s sh
oot
ing
fu
nct
ions
Using the remote control
1
Mount the camera on a tripod or place it on a stable, flat surface.
2
Point the remote control at the
remote control receiver on the
camera and press the shutter
button on the remote control.
• When <0S is selected:
The focus and exposure are
locked, the remote control lamp
blinks and the picture is taken.
When <2S is selected:
The self-timer lamp lights up for
approximately 2 seconds, then
the picture is taken.
Transmitted signal effective area
Point the remote control at the remote control receiver of the camera within
the effective area as shown below.
Powerful lighting such as direct sunlight, fluorescent light or devices emitting
electrical or radio waves could narrow the effective area.
Remote control lamp
Remote control receiver
Remote control receiver
Remote control