Olympus EVOLT E-500 - Manual (Page 176)

176
Camera maintenance
11
Ap
pen
d
ix
Pixel mapping — Checking the image processing functions
The pixel mapping feature allows the camera to check and adjust the CCD
and image processing functions. It is not necessary to operate this function
frequently.
Approximately once a year is recommended. After using the monitor or taking
continuous shots, wait for at least one minute before using the pixel mapping
function to ensure that it operates correctly.
1
Menu [ ] [PIXEL MAPPING]
2
Press d, then press the i button.
• The [BUSY] bar is displayed when pixel mapping is in progress. When
pixel mapping is finished, the menu is restored.
Notes
• If you accidentally turn the camera off during pixel mapping, start again from Step 1.