Olympus C-755 Ultra Zoom - Manual (Page 131)

130
7
Pl
a
yba
ck
Recording sound
Sound can be added to a still picture that you have already taken. (This is known
as “after-recording”.) You can also re-record over the sound that has already
been recorded. Total recording time per picture is approximately 4 seconds.
1
Use the arrow pad to select the
still picture you want to add sound
to.
2
In the top menu, select MODE
MENU Ж
Ж Ж Ж PLAY Ж Ж Ж Ж R.
g“How to use the menus” (P.33)
3
Press d to display START.
4
Turn the camera microphone
toward the sound you want to
record and press
e to start
recording.
• The BUSY bar is displayed during recording.
• To obtain the optimum sound, the microphone should be placed no
farther than 1 m (3.3 ft.) away from the subject.
• If you re-record the sound, the original sound is erased.
• You may not be able to record sound when there is insufficient card
memory (the “CARD FULL” message is displayed).
• Sound recording may pick up camera noises, such as button
operation or shutter movement.
• Once sound is added to a picture, it is not possible to erase only the
sound. In this case, make a re-recording with silence.
Mode dial
Arrow pad
OK button
Microphone
StARt
CARD
SEt
EDIt
PLAY
Note