Olympus C-755 Ultra Zoom - Manual (Page 246)

8
Connecting the camera to a printer
Use the USB cable provided to connect the camera to a PictBridge-
compatible printer.
1
Turn the printer on and plug the
printer end of the USB cable into
the printer’s USB port.
• For details of how to turn the printer on
and the position of the USB port, refer to
the printer’s instruction manual.
2
Set the camera’s mode dial to q
and plug the USB cable into the
camera’s USB connector.
3
Press the power switch to turn the
camera on.
• The monitor turns on and the selection
screen for the USB connection is
displayed.
4
Press ac to select PRINT, then
press e.
• ONE MOMENT is displayed and the
camera and printer are connected. The
PRINT MODE SELECT screen is
displayed on the monitor. Make the print
settings on the camera’s monitor.
g Go
to “Printing pictures” (P.9).
• If PC is selected in step 4, the PRINT mode screen is not
displayed. If the screen is not displayed after several minutes, turn
off the camera and start again from step 1.
Power switch
GO SELECt
Note