Handling the product – Olympus PT-024 User Manual

Page 6

Advertising
background image

E-5

Handling the Product

● Use or storage of the product at the following locations may cause

defective operation, defects, trouble, damage, fire, internal clouding, or
water leakage. Always avoid these locations.

ț Locations reaching high temperatures such as those under direct

sunlight, in an automobile, etc.

ț Locations with open fire

ț Water depths in excess of 40 m

ț Locations subject to vibrations

ț Locations with high temperatures and much dust or with severe

temperature changes

ț Locations with volatile substances

● This product is made of polycarbonate resin with excellent impact

resistance, but it may be damaged by scraping against rocks etc. It
also may break when it hits hard objects or is dropped.

● This product is not a case to soften impacts to the camera inside the

product. When this product with a digital camera inside it is subjected
to impacts or heavy objects are placed onto it, the digital camera may
become damaged. Please handle the product with sufficient care.

● When the product is not used for a long time, the waterproof

performance may drop because of deterioration of the O-ring etc.
Before use, always perform the advance test and the final check.

● Do not apply excessive force to the TTL cable connector or tripod

socket.

● When a flash is used while the Case is being used, shadows may

appear at the edges of the picture. This is especially notable when
taking pictures in macro mode on the wide-angle side. Please use
a flash after image confirmation.

8. When the O-ring contact surface is pressed strongly from the

outside of the Case, or when the Case is twisted, the waterproof
function may be lost. Take care not to exert excessive force.

9. Please use the Case after performing the advance test and the

final check.

10. If you should notice drops of water or other signs of water leakage

while taking pictures, immediately stop the dive, remove any water
from the camera and the product, test according to the item "Final
check", and confirm whether leakage has occurred or not.

PT024_E.qxd 2004.4.20 10:33 AM ページE-5

Advertising