Troubleshooting – Olympus D-630 Zoom User Manual
Page 107
Troubleshooting
107
9
Appendix
(Preparatory operations
(Shooting
Troubleshooting
Possible cause
Corrective action
Ref.
page
The camera does not turn on or function buttons do not respond.
The power is off.
Press the POWER switch to turn the camera
on.
The battery power is
exhausted.
Charge the battery.
–
The cold is temporarily
affecting battery
performance.
Warm the battery by putting it in your pocket
for a while.
–
The camera is in the
sleep mode.
Operate the camera (press the shutter button
or zoom button).
The camera is connected
to a computer.
The camera will not operate while it is
connected to a computer.
–
Possible cause
Corrective action
Ref.
page
No picture is taken when the shutter button is pressed.
The battery power is
exhausted.
Charge the battery.
–
The camera is in the
playback mode.
Press
# to switch to the shooting mode.
The flash has not
finished charging.
Remove your finger from the shutter button,
and wait until the
# (flash charge) indication
stops blinking before taking the picture.
The power is off.
Press the POWER switch.
The internal memory or
card is full.
Erase unwanted pictures or insert a new
card. Before erasing, download important
images to a computer.
The battery power was
exhausted during
shooting or while the
images were being written
to the internal memory or
card. (The monitor turns
off.)
Charge the battery. (Wait until the lamp on
the camera turns off when blinking orange.)
–
There is a problem with
the card.
See “Error codes”.