Flow – Olympus D-630 Zoom User Manual
Page 89
89
8
Connecti
n
g
the
ca
mera to a com
puter
Flow
Using the USB cable provided with your camera, you can connect the
camera and computer and download (transfer) the images to your computer
using the OLYMPUS Master software, also provided with the camera.
Install the OLYMPUS Master software
Connect the camera to the computer using the USB cable
Start up the OLYMPUS Master software
Download image files to the computer
Disconnect the camera from the computer
TIPS
Viewing and editing downloaded images
→ If you want to process images using graphics applications, make sure you
download the images to your computer first. Depending on the software, the
image files may be damaged if the images are processed (rotated, etc.)
while they are still in the internal memory or on the card.
If the data cannot be downloaded from the camera using the USB cable
→ Image files on xD-Picture Card may be downloaded using the optional PC
card adapter. For details, visit the Olympus web site at the address shown
on the back cover of this manual.
Note
• It is recommended that you use the optional AC adapter when connecting the
camera to a computer. If you use battery, make sure that it is fully charged. The
camera does not turn off automatically while it is connected to (communicating
with) a computer. If the battery power runs out, the camera will stop whatever
operation it is performing. This may result in a computer malfunction, or loss of
image data (file) being transmitted.
• Do not turn the camera off while it is connected to the computer. Doing so could
cause the computer to malfunction.
• Connecting the camera to a computer via a USB hub may cause unstable operation
if there is any problem with compatibility between the computer and the hub. In this
case, do not use a hub, but connect the camera directly to the computer.
OLYMPUS Master CD-ROM
USB Cable
Computer equipped with a USB port
Prepare the following items before starting.