Olympus D-630 Zoom - Manual (Page 95)

95
8
Connecti
n
g
the
ca
mera to a com
puter
Connecting the camera to a computer
Use a recommended USB cable provided with the camera to connect the
camera to your computer.
1
Make sure the camera is turned
off.
• The monitor is off.
• The lens is retracted.
• The lamp is off.
2
Plug the USB cable provided into the USB port on the
computer.
• Refer to your computer’s instruction manual to locate the position of the
USB port.
3
Plug the USB cable into the
camera’s multi-connector.
• The camera turns on automatically.
• The monitor turns on and the selection
screen for the USB connection is
displayed.
4
Select [PC], and press Z.
5
The camera is recognized by the
computer.
• Windows 98SE/Me/2000
When you connect the camera to your
computer for the first time, the computer
attempts to recognize the camera. Click
“OK” to exit the message that is displayed. The camera is recognized as a
“Removable Disk”.
Monitor
Lamp
Connector cover
Multi-connector
SELECT GO OK
PRINT
EXIT
USB
P C