Olympus D-630 Zoom - Manual (Page 111)

Troubleshooting
111
9
Appendix
The center of the subject
is too bright. If the center of the subject is too bright, the
image as a whole emerges darker. Adjust the
exposure compensation toward plus (+). P. 47
Bright subjects such as
snow will turn out darker
than their natural colors
in the image. Adjust the exposure compensation toward
plus (+). P. 47
The colors of pictures look unnatural.
Indoor lighting affected
the picture’s colors.
Set the white balance according to the
lighting. P. 48
No white in the picture. Include something white in the picture, or
shoot using [
#].
P. 39
The white balance
setting is wrong. Adjust the white balance according to the
light source. P. 48
Part of the picture is dark.
The lens was partly
blocked by your finger or
the strap.
Hold the camera correctly, keeping your
fingers and the strap away from the lens. P. 22
Pictures you have taken do not appear on the monitor.
The power is off.
Press $ to turn the camera on in playback
mode.
P. 10
The camera is in the
shooting mode. Press $ to switch to playback mode. P. 10,
11
There are no pictures in
internal memory or card. [NO PICTURE] is displayed on the monitor.
Record pictures. –
There is a problem with
the card. See “Error codes”. P. 105
The camera is
connected to a TV. The monitor does not function when the AV
cable is connected to the camera. P. 60
Single-frame erase and all-frame erase cannot be performed.
The pictures are
protected.
Cancel the protection of the pictures. P. 62
No picture is displayed on the TV when connected to the camera.
The video output signal
is incorrect.
Set the video output signal according to the
region where used. P. 61
The TV video signal
setting is incorrect. Set the TV to the video input mode. P. 60
Possible cause Corrective action
Ref.
page