Olympus E-M1 - Manual (Page 109)

109 EN
Menu functions (Accessory port menus)
7
Using OLYMPUS PENPAL
The optional OLYMPUS PENPAL can be used to upload pictures to, and receive
pictures from, Bluetooth devices or other cameras connected to an OLYMPUS
PENPAL. Visit the OLYMPUS website for more information on Bluetooth devices.
 Sending images
Resize and upload JPEG images to another device. Before sending images, make
sure that the receiving device is set to the mode for receiving data.
1 Display the picture you wish to send full frame and
press
Q.
2 Select [Send A Picture] and press Q.
• Select [Search] and press Q in the next dialog. The
camera searches for and displays Bluetooth devices in
range or in [Address Book].
3 Select the destination and press Q.
• The image will be uploaded to the receiving device.
• If prompted to provide a PIN code, enter 0000 and
press Q.
JPEG
<
Erase
Send A Picture
Back Set
Send Picture
Sending
Cancel
 Receiving images/adding a host
Connect to the transmitting device and download JPEG images.
1 Select [OLYMPUS PENPAL Share] in # Accessory
Port Menu (P. 108).
2 Select [Please Wait] and press Q.
• Perform operations for sending images on the sending
device.
• Transmission will start and a [Receive Picture Request]
dialog will be displayed.
#
2
1
c
OLYMPUS PENPAL Share
OLYMPUS PENPAL Album
Electronic Viewfinder
Back
Accessory Port Menu
Set
3 Select [Accept] and press Q.
• The image will be downloaded to the camera.
• If prompted to provide a PIN code, enter 0000 and
press Q.
Receive Picture
Receiving
Cancel