Olympus E-M1 - Manual (Page 16)

16 EN
Preparing the camera and
fl ow of operations
1
Power on
1
Move the ON/OFF lever to the ON position to turn on the camera.
• When the camera is turned on, the monitor will turn on.
• To turn off the camera, return the lever to the OFF position.
 ON/OFF lever
  Monitor
Battery level
; (green): Camera ready to shoot.
: (green): Low battery
] (blinks red): Charge the battery.
250 250 F5.6
i
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:03 01:02:03
1023 1023
R R Wi-Fi
2013.10.01 12:30
Using the monitor
2
1
You can adjust the angle of the monitor.
Camera sleep operation
If no operations are performed for a minute, the camera enters “sleep” (stand-by) mode to
turn off the monitor and to cancel all actions. The camera activates again when you touch
any button (the shutter button,
q button, etc.). The camera will turn off automatically if
left in sleep mode for 4 hours. Turn the camera on again before use.