Olympus E-M1 - Manual (Page 130)

130 EN
Using separately sold accessories
12
 Using the AC adaptor
When using the AC adaptor, open the AC connector
cover and plug in the AC connector.
 Using the dial and button
Set the functions for the HLD-7 dial and B-Fn button using [Button Function] on the
camera’s
c custom menu. g “Button Function” (P. 99)
 Main Specifi cations (HLD-7)
Power supply Battery: Li-ion Battery BLN-1 ×1
AC power supply: AC adapter AC-3
Dimensions Approx. 128.5 mm (W) × 48.2 mm (H) × 57.3 mm (D) (5.1” Ч
1.9” Ч 2.3”)
Weight Approx. 235 g (0.5 lb.) (excluding the battery and connector
cap)
Splash resistance
(when attached to a
camera) Type Equivalent to IEC Standard publication 529 IPX1
(under OLYMPUS test conditions)
# Cautions
• Do not use batteries or AC adaptors other than those specifi ed. Doing so may cause an
injury or may cause the device to fail or explode.
• Do not use your fi ngernails to turn the release knob. Doing so may cause an injury.
• Use the camera only within the guaranteed operation temperature range.
• Do not use or store this device in locations with a lot of dust or high humidity.
• Do not touch the contact points of this device.
• If the main body or contacts become dirty, wipe them with a soft, dry cloth. Do not use a
damp cloth or organic solvents such as paint thinner or benzene.
External fl ash units designated for use with this camera
With this camera, you can use one of the separately sold external fl ash units to
achieve a fl ash suited to your needs. The external fl ashes communicate with the
camera, allowing you to control the camera’s fl ash modes with various available fl ash
control modes, such as TTL-AUTO and Super FP fl ash. An external fl ash unit specifi ed
for use with this camera can be mounted on the camera by attaching it to the camera’s
hot shoe. You can also attach the fl ash to the fl ash bracket on the camera using the
bracket cable (optional). Refer to the documentation provided with the external fl ash
units as well.
The upper limit of the shutter speed is 1/250 sec. when using a fl ash.