Playback on a tv, P.116 – Olympus C-5000 Zoom User Manual
Page 117
116
7
Pl
a
yba
ck
Playback on a TV
Use the video cable provided with the camera to play back recorded images
on your TV. You can play back both still pictures and movies on your TV.
1
Make sure that the TV and camera are turned off. Connect
the VIDEO OUT jack on the camera to the Video input
terminal on the TV using the video cable.
2
Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV’s instruction
manual.
3
Set the mode dial to
q and turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to
select the picture you want to display.
• The close-up playback, index display and slideshow functions can also
be used on a TV screen.
• Make sure that the camera’s video output signal type is the same as
the TV’s video signal type.
g“VIDEO OUT – Selecting the video
• The camera’s monitor turns off automatically when the video cable
is connected to the camera.
• Be sure to use the video cable provided to connect the camera to
the TV.
• The picture may appear off-center on the TV screen.
• When pictures are compressed in order to fit the entire picture on the
TV screen, a black frame appears around the picture. If the picture is
output to a video printer via the TV, the black frame may be printed.
Mode dial
Connect to the TV’s video input (yellow)
terminal.
Video cable
VIDEO OUT jack
Connector cover