Olympus C-5000 Zoom - Manual (Page 52)

51
If correct focus cannot be obtained
S
hoot
ing ba
sics
3
4
Press the shutter button fully.
TIPS
The frame in which you focus on a subject is different from the
frame in which you lock the exposure.
g“AE LOCK – Locking the exposure” (P.76)
Subjects that are difficult to focus on
Under certain types of conditions, the auto focus may not work properly. If this
happens, focus on an object with high contrast at the same distance as the
intended subject (focus lock), recompose your shot and then take the picture.
If the subject has no vertical lines, hold the camera vertically and focus the
camera using the focus lock function by pressing the shutter button halfway,
then return the camera to the horizontal position while keeping the button
pressed halfway and take the picture.
If the subject still cannot be focused on, use the manual focus.
g “Manual
focus” (P.73)
Shutter button
The green lamp
blinks.
The subject cannot be
brought into focus.
Subject with low
contrast Subject with an
extremely bright area
in the center of the
frame Subject without
vertical lines
Subjects at different
distances Fast-moving subject The subject to be
focused on is not in the
center of the frame.
The green lamp lights,
but the subject cannot
be brought into focus.