Olympus C-5000 Zoom - Manual (Page 65)

64
4
Fl
as
h
External flash (optional)
Using the external flash
Various types of flash shooting are possible with Olympus FL series external
flashes. The external flash can be used either by itself or together with the
built-in flash.
If an external flash is used, the flash mode and exposure compensation will
be detected automatically by the camera like the built-in flash. Using the two
flashes together allows for more sophisticated lighting, such as catch lighting
using the built-in flash.
The FL-40 can be mounted on the camera by attaching it to the hot shoe on
the top of the camera, or by using the exclusive FL-BK01 flash bracket
(optional) and FL-CB02 bracket cable (optional).
Below is a description of how to mount the FL-20 flash on the hot shoe.
1
Slide the shoe cover off in the
direction of the arrow and attach
the external flash.
• For instructions on how to attach the
flash, refer to the manual for the
external flash.
• Keep the shoe cover in a safe place to
prevent it getting lost, and replace it on
the camera when you have finished
using the external flash.
2
In the top menu, select MODE
MENU Æ CAMERA Æ Q FLASH.
g“How to use the menus” (P.33)
To use the external flash only
Æ
Select Q (external flash) then press e.
To exit the menu, press e again.
To use the external flash together with the built-in flash
Æ
Select IN+Q (built-in and external flash) then press e.
To exit the menu, press e again.
Mode dial
Shoe cover
CARD
SEt
PIC
CAMERA
NOISE REDUCtION
DIGItAL ZOOM
FLASH
SLOW
IN+