Olympus C-5000 Zoom - Manual (Page 122)

121
U
se
fu
l fu
nc
ti
on
s
8
8 Useful functions
ALL RESET – Saving the camera’s settings
You can save the current camera settings after the power is turned off. The
settings affected by ALL RESET are listed on the next page.
The All Reset setting (ON/OFF) applies to all the modes. If ALL RESET is set
to OFF in one shooting mode, this setting applies to all the other modes, both
shooting and playback.
ON All settings are returned to the factory default settings after the power
is turned off.
OFF The settings made before the power is turned off are saved.
1
In the top menu, select MODE
MENU Æ SETUP Æ ALL RESET Æ
OFF or ON, and press
e.
g“How to use the menus” (P.33)
• Press e again to exit the menu.
• My Mode settings and the settings in the SETUP tab in the MODE
MENU (ALL RESET, W, 8, etc.) are saved even when ALL
RESET is set to ON.
Mode dial
Arrow pad
OK button
Note