Olympus C-4040 Zoom - Manual (Page 133)

133
Chapter 7
Playback on a TV
With the provided AV cable, recorded images and sound can be played back
on a TV.
1 Make sure that the TV and camera power are off .
2 Connect the camera to the TV using the AV cable.
3 Set the mode dial to and turn on the TV. Switch the TV to video
input.
● For details on switching to video input, refer to your TV's instruction
manual.
4 Select an image by using the arrow pad.
● The selected image will be displayed on the TV.
Connect to the TV's video input (yellow)
and audio input (white) terminals.
AV cable
Connect to the A/V OUT jack (black).
● The optional AC adapter is recommended when using the camera
with a TV.
● Images can be rotated only when they are played back on a TV. See
the next page for details.
● Video signal is either NTSC or PAL compatible depending on the
standard in the intended area of distribution.
TIPS
● The camera monitor turns off automatically when the camera is connected
to a TV.
● The image may appear off-center on the TV screen. This is due to the TV's
adjustment settings.
● Your TV may put a black frame around the picture. This is normal.