Olympus IR-300 - Manual (Page 111)

Using the camera with a Dock&Done printer
111
9
i
fu
ncti
on
s
2
Dock the cradle on the storage unit.
3
Set the Dock&Done mode/PC mode switch on the storage
unit to [ _DOCK], and turn on the storage unit.
4
Set the camera in the cradle.
• The camera is powered by the AC
adapter of the storage unit.
• The camera turns on, and the [ _DOCK
MODE] screen is displayed.
5
Select [STORE →NEW ALL
PRINT], and press i.
• The displayed screen and selectable
items vary depending on the camera
settings.
g“Camera settings” (P. 113)
• New pictures in the camera are stored in
the storage unit and then printed.
• When printing is finished, the camera
turns off automatically.
Dock&Done
cable
DOCK MODE
20SEC. TILL STORE NEW ALL PRINT
NEW ALL PRINT STORE
STORE PRINT ORDER
STORE ONLY
EXIT