Sequential shooting – Olympus IR-300 User Manual
Page 43
43
3
Basi
c sh
oo
ti
ng
fu
nct
ion
s
Sequential shooting
You can take a sequence of pictures at one time. The focus, exposure and
white balance are locked at the first frame. When the record mode is set
to [BSUPER HIGH 5M], for example, you can take a sequence of
approximately 4 pictures.
S
Top menu
[MODE MENU]
[j]
[ON] / [OFF]
1
Take the picture.
• Press the shutter button fully and keep it pressed. The camera will take
pictures in sequence until you release the button.
Note
• Sequential shooting is not possible in the following situations:
During panorama, two-in-one pictures, shooting with a frame, or when
f is set to [h], [?], [(], [*], [&], or [)].
• During sequential shooting, the flash is not available.
• If the battery power is low and the battery check indication blinks during
sequential shooting, shooting stops and the camera starts saving the pictures
you have taken. Whether or not all of the shots are saved depends on how
much battery power remains.