Olympus DS-3000 - Manual (Page 40)

40
Linked objects are best suited for network environments where the link between the target
application and the DSS source file can easily be maintained. The actual DSS file is not copied to
the target application; only the path that defines the position of the DSS file is stored in the OLE icon.
If you open the OLE icon within the target application, the DSS file is linked using the path definition.
The file is then played back via the link.
Enable Function Keys
This is used to enable or disable the function keys. When a check mark appears next to this
command, the function keys are enabled.
Setting of Function Keys
A dialog box appears for you to assign the following functions to the F2 through F12 function keys
(you cannot use F5):
- FF
- REW
- PLAY / STOP
- Volume Up
- Speed Up
- Disable Function Keys
Setting Auto Back Space
Set Auto Back Space
You can select the time for "Auto Back Space" from this menu. When playback is stopped, the
position control determines time (Auto Back Space) for backing up.
The following times can be selected.
0.0, 0.3, 0.5, 1.0, 2.0, 3.0, 5.0 sec
Foot Switch Settings
Sets up the Foot Switch (USB or RS-232C / Serial Port).
Options
This command is used to set the following options: downloading, selecting a word processor,
setting E-mail commands, and displaying each folder path.