Olympus E-1 - Manual (Page 129)

129
Function/setting customizing
9
REC VIEW
This allows you to display the picture you have just taken on the monitor while it is
being recorded to the card, and to select how long the picture is displayed. This is
useful for making a brief check of the picture you have just taken. Pressing the shutter
button halfway during REC VIEW lets you resume shooting immediately.
OFF : The picture being recorded to the card is not displayed.
AUTO : The picture being recorded to the card is displayed. The display duration is
automatically set by the camera and varies depending on the recording time.
5sec : The picture being recorded to the card
is displayed for 5 seconds.
20sec : The picture being recorded to the card
is displayed for 20 seconds.
1
In the menu, select T REC VIEW T
OFF, AUTO, 5sec or 20sec. Press the
OK button.
~
“How to use the menus” (P. 38)
Beep sound
The camera beeps when buttons are pressed. It also beeps to alert you to warnings.
You can turn the beep sound on or off with this function.
1
In the menu, select T T OFF or ON. Press the OK button.
~
“How to use the menus” (P. 38)
Monitor brightness adjustment
This allows you to adjust the brightness of the monitor for optimal viewing.
1
In the menu, select
T
. Press .
● The
screen is displayed.
~
“How to use the menus” (P. 38)
2
Press to adjust the brightness.
Press the OK button.
Lo Hi
0
CANCEL CANCEL SELECT GO GO
OK button