Olympus E-1 - Manual (Page 152)

152
T
ransf
err
ing images to a computer
11
Downloading image files to your computer
TIPS
An error message appears when you double-click the [Removable Disk] icon.
T There may be a problem with the camera’s power source (the AC adapter is not properly
connected or the battery power is low).
Check whether the AC adapter is properly connected, or the level of remaining battery
power.
T There is no card in the camera or there is a problem with the card.
Check that you can playback pictures on the monitor of the camera.
After recognizing the camera, the computer creates an icon in the [Explorer] window.
However, this icon cannot be opened.
T The camera’s PC MODE has been set to CONTROL.
Disconnect the camera from the computer, and check the PC mode.
Note
● The card access lamp on the camera blinks while the image is being downloaded. Never
open the card cover on the camera, load or remove the battery, or connect or disconnect
the AC adapter while the lamp is blinking as the image data may be destroyed.
You can download images from the camera and save them in your computer (in this
case, in the Hard Disk).
1
Double-click the [untitled] (or [NO_NAME])
icon displayed on the desktop when the
camera is connected to the computer.
2
Double-click the [DCIM] folder.
3
Double-click the [100OLYMP] folder.
OLYMP
OLYMP
Macintosh